|
|
|
|
|
|
|
Useful Tips!!! |
|
|
|
|
|
- We can save electricity if we schedule the grinding process to specific time.
It will reduce the depreciation of stone also.
|
|
|
- Some people switch on the grinder without adding contents. This should be
avoided.
|
|
|
- We should not add all contents at once, the contents like rice, pulses etc..
they should be added one by one.
|
|
|
- The wet grinder should be placed in an even surface without ups and downs. This will help for smooth grinding process.
|
|
|
- When the grinder is running we should not touch the contents for any reason.
|
|
|
- We should soak the contents in water before grinding them. If it is not done for required time it will lengthen the time of grinding. The flour will not be smooth. It will increase the power consumption also.
|
|
|
- 30 minutes grinding will be sufficient for rice and urad dal.
|
|
|
- A 1Ltr grinder can grind 1/2 kg of grains. Similarly for 1.5 ltr and two ltr grinder the contents should not exceed 3/4 kg and 1 kg respectively. It will be wrong if we try to add grains exceeding half of the capacity of grinder.
|
|
|
- To grind rice, pulses etc., we should use required water. Some people think that using more water will result in more flour which is wrong.
|
|
|
- For Idly and Dosa flour it would be advisable to use less share of Urad dal. It can be 1/3 or 1/4.
|
|
|
- Before starting the grinding process check whether the grinding stone is connected to its chain properly.
|
|
|
- Check for the proper fit of cross arm blade before switching on the grinder.
|
|
|
- Wash the stones and inside portion of grinder before and after its use.
|
|
|
- Check the screws, bolts, belts etc., regularly to ensure smooth grinding.
|
|
|
- No need to use oil or crease frequently.
|
|
|
- For any doubts about the grinder contact the Seller.
|
|
|
|
|
|
FAQ |
^top |
|
|
|
|
Why does it take long time to grind the contents sometimes? |
|
|
Few possible reasons can be- The belt may be loose
- The grinding stone may not fit into the base stone
- The cross arm blade if not fitted properly may cause more grinding time
- Required water for the contents grinded may not be used
- Soaking of contents for required time before grinding is as important
as any other step. If the soaking is not done for required time it may
lenghthen the grinding time.
|
|
|
Shall we reduce the depreciation of grinding stone? |
|
|
If we use the grinder properly the grinding stone will not depreciate for 20 years.
Some people try to wash inside the grinder when the grinder is still on. This will
cause great deal of depreciation to the grinding stone. we should avoid it. |
|
|
How long we can operate the grinder continuously? |
|
|
We can operate the household grinder continuosly to the extent of minimum of 1 hour
and maximum of 5 hours. If we exceed this limit it will heat the motor therby leading to
repairs. |
|
|
How should we service the grinder? |
|
|
Once in 6 months or once in a year we should service the grinder. This will lengthen
the life of grinder. |
|
|
|
^top |